SOPDT – Second order plus dead-time model
Block SymbolLicensing group: STANDARD
Function Description
The SOPDT block is a discrete simulator of a second order continuous-time system with time
delay, which can be described by one of the transfer functions below. The type of the model is
selected by the itf parameter.
For simulation of first order plus dead time systems (FOPDT) use the LLC block with parameter a set to zero.
The exact discretization at the sampling instants is used for discretization of the transfer function. The sampling period used for discretization is equivalent to the execution period of the SOPDT block.
Input
u | Analog input of the block | Double (F64) |
Output
y | Analog output of the block | Double (F64) |
Parameters
itf | Transfer function form 1 | Long (I32) |
|
|
|
k0 | Static gain 1.0 | Double (F64) |
tau | Numerator time constant | Double (F64) |
tau1 | The first time constant 1.0 | Double (F64) |
tau2 | The second time constant 1.0 | Double (F64) |
om | Natural frequency 1.0 | Double (F64) |
xi | Relative damping coefficient 1.0 | Double (F64) |
pb0 | Numerator coefficient: 1.0 | Double (F64) |
pb1 | Numerator coefficient: 1.0 | Double (F64) |
pa0 | Denominator coefficient: 1.0 | Double (F64) |
pa1 | Denominator coefficient: 1.0 | Double (F64) |
del | Dead time [s] | Double (F64) |
nmax | Size of delay buffer (number of samples) for the time delay del. Used for internal memory allocation. 10 10000000 1000 | Long (I32) |
[Previous] [Back to top] [Up]
2023 © REX Controls s.r.o., www.rexygen.com